1.     Azvar, M. and Budak, E., “Multi-Dimensional Chatter Stability for Enhanced Productivity in Different Parallel Turning Strategies”, Int. Journal of Machine Tools and Manufacture, Vol. 123, pp. 116-128, 2017.

 

2.     Yigit, U., Cigeroglu, E., Budak, E., “Chatter Reduction in Boring Process by Using Piezoelectric Shunt Damping With Experimental Verification”, Mechanical Systems and Signal Processing Vol. 94, pp. 312–321, 2017.

 

3.     Comak, A. and Budak, E., “Modeling Dynamics and Stability of Variable Pitch and Helix Milling Tools for Development of a Design Method to Maximize Chatter Stability”, Precision Engineering, Vol. 47, pp. 459–468, 2017.

 

4.     Ozkirimli, O., Tunc, L.T., Budak, E., “Generalized Model for Dynamics and Stability of Multi-Axis Milling with Complex Tool Geometries”, Journal of Materials Processing Technology, Vol.  238 pp. 446–458, 2016.

 

5.     Tunc, L.T., Budak, E., Bilgen, S., Zatarain, M., “Process Simulation Integrated Tool Axis Selection for 5-axis Tool Path Generation”, CIRP Annals-Manufacturing Technology, Vol. 65/1, pp. 381-384, 2016.

 

6.     Munoa, J., Beudaert, X., Dombovari, Z.,  Altintas, Y., Budak, E., Brecher, C., Stepan, G., “Chatter Suppression Techniques in Metal Cutting”, CIRP Annals-Manufacturing Technology, Vol. 65/2, pp. 785-808, 2016.

 

7.     Budak, E., Ozlu, E., Bakioglu, H, Barzegar, Z., “Thermo-Mechanical Modeling of the Third Deformation Zone in Machining for Prediction of Cutting Forces”, CIRP Annals-Manufacturing Technology, Vol. 65/1, pp. 121-124, 2016.

 

8.     Tunc, L. T, Ozkirimli, O. and Budak, E., “Machining Strategy Development and Parameter Selection in 5-Axis Milling Based On Process Simulations”, International Journal of Advanced Manufacturing Technology, Vol. 85/5, pp 1483-1500, 2016.

 

9.     Aksu, B., Celebi, C. and Budak, E., “An Experimental Investigation of Oblique Cutting Process”, Machining Science and Technology, Vol. 20/3, pp. 495-521, 2016.

 

10.   Karaguzel, U., Uysal, E., Budak, E. and Bakkal, M., “Effects of tool axis offset in turn-milling process” Journal of Masterials Processing Technology, Vol. 231, pp.239-247, 2016.

 

11.   Ozturk, E., Comak, E. and Budak, E., “Tuning of Tool Dynamics For Increased Stability of Parallel (Simultaneous) Turning Processes”, Journal of Sound and Vibration, Vol. 360, pp.17-30, 2016.

 

12.   Ozsahin, O., Budak, E. and Ozguven, H. N., “Identification of Bearing Dynamics under Operational Conditions for Chatter Stability Prediction in High Speed Machining Operations”, Precision Engineering, Vol.42, pp. 53-65, 2015.

 

13.   Aslan, D. and Budak, E., “Surface Roughness and Thermo-mechanical Force Modeling for Grinding Operations with Regular and Circumferentially Grooved Wheels”, Journal of Materials Processing Technology, Vol. 223, pp. 75-90, 2015.

 

14.   Karaguzel, U., Uysal, E., Budak, E. Bakkal, M., “Analytical Modeling of Turn-milling Process Geometry, Kinematics and Mechanics”, Int. Journal of Machine Tools and Manufacture, Vol. 91, pp.24-33, 2015.

 

15.   Karaguzel, U., Olgun, U., Uysal, E., Budak, E., Bakkal, E., “Increasing tool life in machining of difficult-to-cut materials using nonconventional turning processes”, Int. Journal of Advanced Manufacturing Technology, Vol. 77, pp. 1993-2004, 2015  .

 

16.   Ozsahin, O., Budak, E. and Ozguven, H.N., “In-process Tool Point FRF Identification Under Operational Conditions Using Inverse Stability Solution”, Int. Journal of Machine Tools and Manufacture, Vol. 89, pp. 64-73, 2015.

 

17.   Tunc, L.T., Ozkirimli, O. and Budak, E., “Generalized Cutting Force Model in Multi Axis Milling Using a New Engagement Boundary Determination Approach”, Int. Journal of Advanced Manufacturing Technology, Vol. 77, pp. 341-355, 2015 .

 

18.   Altintas, Y., Kersting, P., Biermann, D., Budak, E. , Denkena, B. and Lazoglu, I., “Virtual Process Systems for Part Machining Operations”, CIRP Annals-Manufacturing Technology, Vol. 63/2, pp. 585-605, 2014.

 

19.   Ozsahin, O., Ozguven, H.N. and Budak, E., “Analytical Modeling of Asymmetric Multi-segment Rotor – Bearing Systems with Timoshenko Beam Model Including Gyroscopic Moments”, Computers and Structures, Vol. 144, pp. 119-126, 2014.

 

20.   Tunc, L.T. and Budak, E., “Identification and Modeling of Process Damping in Milling”, Trans. ASME Journal of Manufacturing Science and Engineering”, Vol. 135, 2013.

 

21.   Budak, E., Çomak, A. and Öztürk, E., “Stability and High Performance Machining Conditions in Simultaneous Milling, CIRP Annals-Manufacturing Technology, Vol. 62/1, 2013.

 

22.   Budak, E., Tunc, L. T, Alan, S., Ozguven, H.N., Prediction of Workpiece Dynamics and its Effects on Chatter Stability in Milling, CIRP Annals-Manufacturing Technology, Vol. 61/1, pp. 339-342, 2012.

 

23.   Tunc, L.T. and Budak, E, “Effect of Cutting Conditions and Tool Geometry on Process Damping in Machining”, International Journal of Machine Tools and Manufacture, Vol. 57, pp.10-19, 2012.

24.   Budak, E. and Ozturk, E., Dynamics and Stability of Parallel Turning Operations”, CIRP Annals-Manufacturing Technology, Vol. 60/1, pp. 383-386, 2011.

25.   Ozkirimli, O.M. and Budak, E., “Process Simulation for 5-Axis Machining for Generalized Milling Tools”, International Journal of Design Engineering, special issue: Advanced Methods for Virtual Machine Design and Production, Vol. 3, No. 3, pp. 232-246, 2011.

26.   Ozelkan, E. C., Ozturk, O. and Budak, E., “Identifying Parameters of a Broaching Design Using Non-Linear Optimization”, International Journal of Modeling, Identification and Control, Vol. 12, No. 13, pp. 244-252, 2011.

27.   Ozturk, E., Tunc, L. T. and Budak, E., “Analytical Methods for Increased Productivity in 5-axis Ball-end Milling”, International Journal of Mechatronics and Manufacturing Systems (special issue on Advances in Multi-Axis Machining and Machine Tool Control), Vol. 4, No. 3/4, pp. 238-265, 2011. 

28.   E. Ozlu, A. Molinari, E. Budak, “Two-Zone Analytical Contact Model Applied to  Orthogonal Cutting”, Journal of Machining Science and Technology, Vol. 14, No. 3. pp. 323-343, 2010.

29.   Budak, E. and Tunc, L. T., “Identification and Modeling of Process Damping in Turning and Milling Using a New Approach”, CIRP Annals-Manufacturing Technology, Vol. 59/1, 2010.

30.    Alan, S., Budak, E. and Ozguven, H. N., “Analytical Prediction of Part Dynamics for Machining Stability Analysis”, International Journal of Automation Technology (special issue on Modeling and Simulation of Cutting Process), Vol. 4, No. 3, May 2010.

31.   O. Özşahin, H. N. Özgüven, E. Budak, “Analysis and Compensation of Mass Loading Effect of Accelerometers on Tool Point FRF Measurements for Chatter Stability Predictions”, Int. J. Machine Tools and Manufacture, Vol. 50, No. 6, 585-589, 2010.

32.   E. Ozturk and E. Budak, “Modeling Dynamics and Stability of 5-Axis Ball-end Milling Using Single and Multi Frequency Solutions”, Trans. ASME Journal of Manufacturing Science and Technology, Vol. 132, 021003 (12 pages), 2010

33.   Ozturk, E., Tunc, T. and Budak, E., “Investigation of Lead and Tilt Angle Effects in 5-Axis Ball-End Milling Processes”, International Journal of Machine Tools and Manufacture, Vol. 49, 1053-1062, 2009.

34.   Budak, E. and Tunc, L. T., “A New Method for Identification and Modeling of Process Damping in Machining”, Trans. ASME Journal of Manufacturing Science and Technology, Vol. 131, 051019 (10 pages), 2009.

35.   Ozlu, E. and Budak, E., “Analytical and Experimental Investigation of Rake Contact and Friction Behavior in Metal Cutting”, International Journal of Machine Tools and Manufacture, Vol. 49/11, 865-875, 2009.

36.   Kayhan, M. And Budak, E., “An Experimental Investgation of Chatter Effects On Tool Life”, Journal of Engineering Manufacture, Vol. 223 (B11), 1455-1463, 2009.

37.   Budak, E., Ozturk, E., Tunc, L.T., “Modeling and Simulation of 5-Axis Milling Processes”, Annals of the CIRP, Vol. 58/1, 347-350, 2009.

38.   Ozsahin, O., Erturk, A., Ozguven, H.N. and Budak, E., “A Closed-Form Approach for Identification of Dynamical Contact Parameters in Spindle-Holder-Tool Assemblies”, International Journal of Machine Tools and Manufacture, Vol. 49, pp. 25-35, 2009.

39.   Tunc, T. and Budak, E., Extraction of 5-axis Milling Conditions from CAM Data for Process Simulation, International Journal of Advanced Manufacturing Technology (in press - DOI 10.1007/s00170-008-1735-7).

40.   Budak, E. and Ozlu, E., “Development of a Thermomechanical Cutting Process Model for Machining Process Simulations”, Annals of the CIRP, Vol. 57/1, pp. 97-100, 2008.

41.   Ozturk, E. and Budak, E., “Modeling of 5-Axis Milling Process”, Machining Science and Technology Vol. 11:3, pp. 287 – 311, 2007.

42.   Ozlu, E. and Budak, E., Analytical Modeling  of Chatter Stability in Turning and Boring Operations Part I: Model Development, Trans. ASME Journal of Manufacturing Science and Technology, Vol. 129, pp. 726-732, 2007.

43.   Ozlu, E. and Budak, E., Analytical Modeling  of Chatter Stability in Turning and Boring Operations Part II: Experimental Verification, Trans. ASME Journal of Manufacturing Science and Technology, Vol. 129, pp. 733-739, 2007.

44.   Ozlu, E. and Budak, E., Comparison of One Dimensional and Multi Dimensional Models in Stability Analysis of Turning Operations, International Journal of Machine Tools and Manufacture, Vol. 47, pp. 1875-1883, 2007.

45.   Budak, E. and Ozlu, E., “Analytical Modeling of Chatter Stability in Turning and Boring Operations: A Multi-Dimensional Approach”, Annals of the CIRP, Vol. 56/1, pp. 401-404, 2007.

46.   Ertürk, A., Budak, E., Ozguven, H.N., “Selection of Design and Operational Parameters in Spindle-Holder-Tool Assemblies for Maximum Chatter Stability by Using a New Analytical Model”, International Journal of Machine Tools and Manufacture, Vol. 47, pp. 1401-1409, 2007.

47.   Cimren, E., Catay, B and Budak, E., “Development of a Machine Tool Selection System Using AHP” Journal of Advanced Manufacturing Technology, Vol. 35 (issue 3/4), pp. 363-376, 2007.

48.   Ertürk, A., Özgüven, H.N., Budak, E., “Analytical Modeling of Spindle-Tool Dynamics on Machine Tools Using Timoshenko Beam Model and Receptance Coupling for the Prediction of Tool Point FRF”, International Journal of Machine Tools and Manufacture, Vol. 46, pp. 1901-1912, 2006.

49.   Ertürk, A., Özgüven, H.N., Budak, E., “Effect Analysis of Bearing and Interface Dynamics on Tool Point FRF for Chatter Stability in Machine Tools by using a New Analytical Model for Spindle-Tool Assemblies”, International Journal of Machine Tools and Manufacture ,  Vol. 47/1, pp. 23-32, 2007.

50.   Budak, E., Ertürk, A., Özgüven, H.N., “A Modeling Approach for Analysis and Improvement of Spindle-Holder-Tool Assembly Dynamics”, Annals of the CIRP, Vol. 55, pp. 369-372, 2006.

51.   Budak, E., “Analytical Methods for High Performance Milling-Part I: Forces, Form Error and Tolerance Integrity”, International Journal of Machine Tools and Manufacture, Vol 46/12-13, pp. 1478-1488, 2006.

52.   Budak, E., “Analytical Methods for High Performance Milling-Part II: Process Dynamics and Stability”, International Journal of Machine Tools and Manufacture, Vol 46/12-13 pp 1489-1499, 2006.

53.   Budak, E. and Tekeli, A., “Maximizing Chatter Free Material Removal Rate in Milling through Optimal Selection of Axial and Radial Depth of Cut Pairs”, Annals of the CIRP, Vol. 54/1, pp. 353-356, 2005.

54.   Tekeli, A. and Budak, E., “Maximization Of Chatter Free Material Removal Rate In End Milling Using Analytical Methods”, Machining Science and Technology, Vol. 9, pp. pp. 147-167, 2005.

55.   Kıvanc, E. and Budak, E., "Structural Modeling of End Mills for Form Error and Stability Analysis", International Journal of Machine Tools and Manufacture, Vol. 44/11 pp. 1151-1161, 2004.

56.   Budak, E., Lazoglu, I. And Guzel, B.U., "Improving Cycle Time in Sculptured Surface Machining Through Force Modeling", Annals of the CIRP, Vol.53/1, pp.103-106, 2004.

57.   Arslan, C.,  Çatay , B. and Budak, E. "A Decision Support System for Machine Tool Selection", Integrated Manufacturing Systems Journal of Manufacturing Technology Management, Vol. 15/1, pp.101-109, 2004. .

58.   Budak, E., "An Analytical Design Method for Milling Cutters with Non Constant Pitch to Increase Stability-Part I: Theory", Trans. ASME Journal of Manufacturing Science and Engineering  Vol. 125, pp. 29-34, 2003.

59.   Budak, E., "An Analytical Design Method for Milling Cutters with Non Constant Pitch to Increase Stability-Part II: Application", Trans. ASME Journal of Manufacturing Science and Engineering  Vol. 125, pp. 34-38, 2003.

60.   Nemes, J.A., Asamoah-Attiah, S. and Budak, E., "Cutting Load Capacity of End Mills with Complex Geometry", Annals of the CIRP, Vol. 50/1, pp.65-68, 2001.

61.   Wiercigroch, M. and Budak, E., "Sources of Non Linearities, Chatter Generation and Suppression in Metal Cutting", Philosophical Transactions of the Royal Society London, vol. 359, pp. 663-693, 2001.

62.   Budak, E., "Improvement of Productivity and Part Quality in Milling of Titanium Based Impellers by Chatter Suppression and Force Control", Annals of the CIRP, Vol. 49/1, pp. 31-36, 2000.

63.   Altintas, Y., Shamoto, E., Lee, P. and Budak, E., "Analytical Prediction of Stability Lobes in Ball-End-Milling", Trans. ASME Journal of Manufacturing Science and Engineering, Vol. 121, No. 4, pp. 586-592, Nov. 1999.

64.   Altintas, Y., Engin, S, Budak, E., " Analytical Stability Prediction and Design of Variable Pitch Cutters", Trans. ASME Journal of Manufacturing Science and Engineering, Vol. 121, pp. 173-178, May 1999.

65.   Budak, E. and Altintas, Y., "Analytical Prediction of Chatter Stability in Milling-Part I: General Formulation", Trans. ASME Journal of Dynamic Systems, Measurement and Control, Vol. 120, pp. 22-30, March 1998.

66.   Budak, E. and Altintas, Y., "Analytical Prediction of Chatter Stability in Milling-Part II: Application of the General Formulation to Common Milling Systems, Trans. ASME Journal of Dynamic Systems, Measurement and Control, Vol. 120, pp. 31-36, March 1998.

67.   Budak, E., Altintas, Y. and Armarego, E.J.A., "Prediction of Milling Force Coefficients From Orthogonal Cutting Data", Trans. ASME Journal of Manufacturing Science and Engineering, Vol. 118, pp.216-224, May 1996.

68.   Altintas, Y., Budak, E. "Analytical Prediction of Stability Lobes in Milling", Annals of the CIRP, Vol. 44/1, pp. 357-362, 1995.

69.   Budak, E. and Altintas, Y., "Modeling and Avoidance of Static Deformations in Peripheral Milling of Plates", Int.J. Machine Tools and Manufacture, Vol. 34, No. 3, pp. 459-476, 1995.

70.   Budak, E. and Altintas, Y., "Identification of Peripheral Milling Conditions for Improved Dimensional Accuracy", Int.J. Machine Tools and Manufacture, Vol. 34, No. 7, pp. 907-918, 1994.

71.   Budak, E. and Ozguven, H.N., "Iterative Receptance Method for Harmonic Response of Structures with Symmetrical Nonlinearities", Mechanical Systems and Signal Processing, Vol. 7, No. 1, pp. 75-87, 1993.

72.   Altintas, Y., Montgomery, D., Budak, E., "Dynamic Peripheral Milling of Flexible Structures", Trans. ASME Journal of Engineering for Industry, Vol. 114, pp. 137-145, 1992.

 

73.   F. Tehranizadeh and E. Budak, “Design of Serrated End Mills for Improved Productivity”, 16th CIRP Conference on Modeling of Machining Operations, Cluny, France, June 2017.

 

74.   U. Karaguzel, M. Bakkal and E. Budak, “Mechanical and Thermal Modeling of Orthogonal Turn-milling Operation”, 16th CIRP Conference on Modeling of Machining Operations, Cluny, France, June 2017.

 

75.   E. Yuksel, E. Budak and A. S. Erturk, “The Effect of Linear Guide Representation for Topology Optimization of a Five-axis Milling Machine”, 16th CIRP Conference on Modeling of Machining Operations, Cluny, France, June 2017.

 

76.   M. Yaser, T. Tunc and E. Budak, “Investigation of Process Damping Effect for Multi-Mode Milling Systems”, 16th CIRP Conference on Modeling of Machining Operations, Cluny, France, June 2017.

 

77.   H.Jamshidi, B.Yastıkcı, M.Gurtan and E.Budak, “Grinding Force Model for Inconel 718 with CBN and Conventional Wheels”, 6th International Conference on Virtual Machining Process Technology (VMPT), Montréal, May 29th – June 2nd, 2017.

 

78.   Yaqoob, H. and Budak, E., “An Alternative Methodology for Machine Tool Error Determination through Workpiece Measurement”, 6th International Conference on Virtual Machining Process Technology (VMPT), Montréal, May 29th – June 2nd, 2017.

 

79.   Azvar, M. and Budak, E., “Multi-Dimensional Modeling of Chatter Stability In Parallel Turning Operation”, The 17th International Conference on Machine Design and Production, July 12 – July 15 2016, Bursa, Turkey.

 

80.   Yastikci, B., Jamshidi, H. and Budak, E., “Experimental Investigation of Wear Mechanisms with Electroplated CBN Wheel”, International Symposium on Advances in Abrasive Technology, Stockholm, 2-5 October, 2016.

 

81.   Yilmaz, E. E., Budak, E. and Ozguven, H. N., “Modeling and Measurement of Micro End Mill Dynamics Using Inverse Stability Approach”, 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, June 2016.

 

82.   Karaguzel, U., Bakkal, M. and Budak, E., “Modeling and Measurement of Cutting Temperatures in Milling”, 7th HPC 2016 – CIRP Conference on High Performance Cutting, Chemnitz, June 2016.

 

83.   M. Putz, S. Ihlenfeldt , U.Karaguzel, U. Semmler, E. Budak, M. Bakkal, R. Wertheim, “Improving performance of turn-milling by controlling forces and thermally induced tool-center point (TCP) displacement”,   13th Global Conference on Sustainable Manufacturing - Decoupling Growth from Resource Use, Bình Dương New City, Vietnam, September 2015.

 

84.   M. Albayrak, T. K. Yalcin, M. Erberdi, E. Ozlu, E. Budak, “Static and Dynamic Analysis of Different Machine Tool Spindles”, 8th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS , 18-21 JUNE 2015 Pine Bay Holiday Resort, Kusadasi, Aydin, TURKEY.

85.   T.K. Yalcin, A. Avci, M.S. Erberdi, E.Budak, “An Experimental Study for Tool Center Point Displacements of a 5-axis CNC Machine Tool due to Thermal Effects”, 8th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS , 18-21 JUNE 2015 Pine Bay Holiday Resort, Kusadasi, Aydin, TURKEY.

 

86.   S. Bilgen, E. Özlü, M.S. Erberdi, E.Budak, “An Experimental Study of CNC Machine Tool Feed Drive Limits and Cycle Time Prediction for a 3-axis Milling Operation”, 8th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS , 18-21 JUNE 2015 Pine Bay Holiday Resort, Kusadasi, Aydin, TURKEY.

87.   C. Çelebi Şen, E. Özlü, E. Budak, “Experimental and Analytical Investigation of Third Deformation Zone in Orthogonal Cutting”, Virtual Machining Production Technology, Vancouver, June 2015.

 

88.   H. Bakioglu, E. Özlü, E. Budak, “ Thermo-mechanical Modeling of Cutting Forces in Micro EndMilling Operations”, Virtual Machining Production Technology, Vancouver, June 2015.

 

89.   M. E. Kara and E. Budak, “Optimization of Turn-Milling Processes”, Proceeding of the 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '14, July 23-25, Capri, Italy.

 

90.   E. Uysal, U. Karaguzel, E. Budak, M. Bakkal, “Investigating Eccentricity Effects in Turn-Milling Operations”, Proceedings of the 6th CIRP Conference on High Performance Cutting, June 23-25, Berkeley, CA, USA.

 

91.   D. Aslan and E. Budak, “Semi-analytical force model for grinding operations”, Proceedings of the 6th CIRP Conference on High Performance Cutting, June 23-25, Berkeley, CA, USA.

 

92.   D. Aslan and E. Budak, “Workpiece Surface Burn Detectıon by Force and Temperature Modeling for Grinding Operations”, Proceedings of the 16th Internatıonal Conference on Machine Design and Production UMTIK 2014, June 30-July İzmir, Turkey.

 

93.   U. Karaguzel, E. Uysal, E. Budak and M. Bakkal, “Modeling of Turn Milling Processes for Increased Productivity”, Proceedings of the 16th International Conference on Machine Design and Production UMTIK 2014, June 30-July, Izmir, Turkey.

 

94.   Karaguzel, U., Olgun, U., Uysal, E., Budak, E. and Bakkal, M., “High Performance Turning of High Temperature Alloys on Multi-Tasking Machine Tools”, Proceedings of the 4th Machining Innovations Conference: New Production Technologies in Aerospace Industry, Hannover, September 2013, pp. 1-9.

95.   Celebi, C., Ozlu, E. and Budak, E.,” Modeling and Experimental Investigation of Edge Hone and Flank Contact Effects in Metal Cutting”, 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Torino, Italy, June 2013.

96.   Olgun, U. and Budak, E.,” Machining of Difficult-to-Cut-Alloys Using Rotary Turning Tools”, 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Torino, Italy, June 2013.

97.   Koca, R. and Budak, E., “Optimization of Serrated End Mills for Reduced Cutting Energy and Higher Stability”, 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), Torino, Italy, June 2013.

98.   Çomak, A., Koca, R., Ozkirimli, O. and Budak, E., “Modeling and Simulation Based Design of Variable Pitch and Variable Helix Milling Tools for Increased Chatter Stability”, Proceeding of the 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds,  June 2013,  Antalya, Turkey.

99.   Yasa, E., Orhangul, A., Songuler, S.C., Platin, S., Baytok, E., Ozlu, E., Tunc, T. and Budak, E.,” Assessment of machinability performance in 5-axis milling of Inconel 718 alloy with different carbide grades”, Proceeding of the 7th International Conference and Exhibition on Design and Production of Machines and Dies/Molds,  June 2013,  Antalya, Turkey.

100.Yigit, U., Cigeroglu, E. and Budak, E., “Chatter Reduction in Turning by Using Piezoelectric Shunt Circuits”, IMAC-XXXI Conference and Exposition on Structural Dynamics, Orange County, California, Feb. 11-14, 2013.

101.Karaguzel, U., Bakkal, M. and Budak, E., “Process Modeling of Turn-Milling Using Analytical Approach, 3rd CIRP Conference on Process Machine Interactions, PMI 2012, Nagoya, Japan, October 29-31, 2012, (pp.130-138).

102.Budak, E., Suppression of Chatter Vibrations in Simultaneous Machining Operations, 15^th IMEC, November 2-3, Tokyo Big Sight, Japan. (Invited talk and paper).

103.Budak, E., “Improving 5-Axis Milling Operations Using Process Models”, 9th International Conference on Machine Tools, Automation, Technology and Robotics (MATAR), Prag, Sept. 12-14, 2012 (Invited Keynote Paper).

104.Ozsahin, O, Budak, E., Ozguven, H.N., “Analytical Modeling of the Machine Tool Spindle Dynamics under Operational Conditions”, Proceedings of the 37th International MATADOR Conference, Manchester, UK, July 2012. 

105.Comak, A. and Budak, E., “Chatter Stability of Parallel Milling Operations”, UMTIK 2012 (Machining Day), Pamukkale, Denizli, June 19, 2012.

106.Ozlu, E, Tunc, T., Guven, I., Budak, E., “Industrial Applications of Science Integrated Machining Approach “,UMTIK 2012 (Machining Day), Pamukkale, Denizli, June 19, 2012.

107.Cakir, E., Ozlu, E., Bakkal, M., Budak, E., “Modeling of Temperature Distribution in Orthogonal Cutting with Dual-Zone Contact at Rake Face”, 1st International Conference on Virtual Machining Process Technology, Ecole Polytechnique, Montreal, Canada, 28 May 28- 1 June, 2012.

108.L. Ti, Tunc and E. Budak, “Effect of Cutting Conditions and Tool Geometry on Process Damping in Machining”, 4th International Conference on Manufacturing Engineering ICMEN, Thessaloniki, Greece October 3‐5, 2011.

109.O. M. Ozkirimli, L.T. Tunc, E. Budak, “ Simulation of Multi-Axis Machining Processes Using Z-mapping Technique”, Proceeding of the 6th International Conference and Exhibition on Design and Production of Machines and Dies/Molds,  23-26 June 2011,  Ankara, Turkey.

110.O. Ozsahin, E. Budak, H. N. Ozguven, "Investigating Dynamics of Machine Tool Spindles under Operational Conditions", Proceedings of the 13th CIRP Conference on Modeling of Machining Operations, 12-13 May 2011, Sintra, Portugal, Advanced Materials Research, Vol.  223, pp. 610-621, 2011.

111.V. Aran and E. Budak, “An Experimental Study on Dynamics and Stability of Miniature End Mills”, Proceedings of the 13th CIRP Conference on Modeling of Machining Operations, 12-13 May 2011, Sintra, Portugal, Advanced Materials Research, Vol.  223, pp. 869-878, 2011.

112.Ozturk, E. and Budak, E, “ Modeling of Parallel Turning Applications”, Proceedings of 4th CIRP International Conference on High Performance Cutting, October 24-26, Gifu, Japan, 2010.

113.Tunc L.T., Ozkirimli O., Ozturk E., Y. Murtezaoglu, Budak E., “Machining Strategy Development in 5-Axis Milling Operations Using Process Models”, Proceedings of 4th CIRP International Conference on High Performance Cutting, October 24-26, Gifu, Japan 2010.

114.Ozturk, E. and Budak, E., “Modeling Dynamics of Parallel Milling Processes in Time-Domain”, 2nd International CIRP Conference on Process Machine Interactions (PMI2010), June 10-11, Vancouver, Canada.

115.Akcay, R., .Memis, E.K,  Ozlu, E., Budak, “E., Increasing Productivity in High Speed Milling of Airframe Components Using Chatter Stability Diagrams”, 2nd International CIRP Conference on Process Machine Interactions (PMI2010), June 10-11, Vancouver, Canada.

116.Ozlu, E.,  Engin, S.,  Cook, C., El-Wardany, T.,  Budak, E., “Simulation of Broaching Operations for Tool Design Optimization”, 2nd International CIRP Conference on Process Machine Interactions (PMI2010), June 10-11, Vancouver, Canada.

117.Ozturk, E. and Budak, E., “Tool Orientation Effects on the Geometry of 5-axis Ball-end Milling”, Proceedings of the 36th International MATADOR Conference, pp. 243-246, Manchester, UK, July 2010 

118.Ozkirimli, O. M. and Budak, E., “Process Simulation For 5-Axis Machining Using Generalized Milling Tool Geometries”, UMTIK, KKTC (North Cyprus), June 2010.

119.Ozturk, E., Ozkirimli, O, Suren, G., Aksu, B., Budak, E., “Increasing Productivity in Die Machining Through Process Modeling”, Proceedings of the 5th International Conference and Exhibition on Design And Production of Machines And Dies/Molds, Kusadasi, Aydin, Turkey, June 18-21, 2009.

120.Ozlu, E. and Budak, E., “ Process Modeling of Orthogonal Cutting with Hone Radiused Tools”, Proceedings of the 12th CIRP Conference on Modeling of Machining Operations, San Sebastian, Spain, May 12-13, 2009.

121.Ozsahin, O., Ozguven, H. N. and Budak, E., “Estimation Of Dynamic Contact Parameters For Machine Tool Spindle-Holder-Tool Assemblies Using Artificial Neural Networks”, Proceedings of the 3rd CIRP International Conference on Manufacturing Engineering (ICMEN), Kassandra, Greece, October 1-4, 2008.

122. Ozsahin, O., Ozguven, H.N., Budak, E., “Mass Loading Effect of Accelerometers on Tool Point FRF and Stability Diagrams”, Proceedings of the 12th CIRP Conference on Modeling of Machining Operations, San Sebastian, Spain, May 12-13, 2009.

123.Aksu, B., Ozlu, E. and Budak, E.,”Analysis And Modeling Of Edge Forces In Orthogonal Cutting”, Proceedings of the 3rd CIRP International Conference on Manufacturing Engineering (ICMEN), Greece, October 1-4, 2008.

124.Atlar, S., Budak, E. and Ozguven, H. N., “Modeling Part Dynamics and Chatter Stability In Machining Considering Material Removal”, Proceedings of the 1st CIRP International Conference on Process Machine Interactions, Hannover, Germany, September, 2008.

125.Budak, E. and Tunc, L.T., “A New Method for Identification and Modeling of Process Damping in Machining”, Proceedings of the CIRP 1st International Conference on Process Machine Interactions, Hannover, Germany, September, 2008.

126.Ozturk, E and Budak, E., “Chatter Stability of 5-Axis Milling Using Multi-Frequency Solution”, Proceedings of the 3rd International Conference on High Performance Cutting, Dublin, Ireland, HPC-P-066, pp. 429-444, June 2008.

127.Ozlu, E and Budak, E., “Investigation of Friction in Metal Cutting Operations”, Proceedings of the 3rd International Conference on High Performance Cutting, Dublin, Ireland, HPC-P-071, pp. 31-44, June 2008.

128.Budak, E., “Analytical Modeling of Chatter Frequency Using Multi-Dimensional Approach”, PAMM Proc. Appl. Math. Mech. 7, 1150701–1150702 (2007) (DOI 10.1002/pamm.200700876), ICIAM 2007, Zurich, July 2007.

129.Budak, E., Catay, B., Tekin, I, Yenigun, H., Abbak, M., Drannikov, S., Simsek, O., “Design of an RFID-based Manufacturing Monitoring and Analysis System”, RFID Eurasia Proceedings, September 2007, Istanbul, Turkey.

130.Budak, E., Catay, B., Tekin, I, Yenigun, H., Abbak, M., Drannikov, S., “Microstrip Patch Antenna For RFID Applications”, RFID Eurasia Proceedings, September 2007, Istanbul, Turkey.

131.Ozlu, E. and Budak, E., Experimental Analysis and Modeling of Orthogonal Cutting Using Material and Friction Models,  Proceedings of 3rd International Conference and Exhibition on Machines and Design and Production of Dies and Molds, Cesme, Izmir, Turkey, 21-23 June, 2007.

132.Ozturk, E., Tunc, T. and Budak, E., Machining Parameter and Strategy Selection in Multi Axis Milling of Sculptured Surfaces, Proceedings of 3rd International Conference and Exhibition on Machines and Design and Production of Dies and Molds, Cesme, Izmir, Turkey, 21-23 June, 2007.

133.Ozlu, E., Budak, E. and Molinari, A., Thermomechanical Modeling of Orthogonal Cutting Including the Effect of Stick-Slide Regions on the Rake Face, Proceedings of the 10th CIRP International Workshop On Modeling Of Machining Operations, Reggio Calabria, Italy, August 27-28, 2007.

134.Tunc, T. and Budak, E., Optimization of 5-Axis Milling Processes Based on the Process Models with Application to Airfoil Machining, Proceedings of the 10th CIRP International Workshop On Modeling Of Machining Operations, Reggio Calabria, Italy, August 27-28, 2007.

135.Ozturk, E., Ozlu, E. and Budak, E., Modeling Dynamics and Stability of 5-axis Milling Processes, Proceedings of the 10th CIRP International Workshop On Modeling Of Machining Operations, Reggio Calabria, Italy, August 27-28, 2007.

136.Ozelkan, E.C., Ozturk, O., Budak, E, Optimization of Broaching Design, Proceedings of the 2007 Industrial Engineering Research Conference, 2007. 

137.Ozlu, E., Ozsahin, O., Budak, E., Ozguven, N., The Use of Noise Measurements in Machining Stability Analysis, Proceedings of the Inter-Noise 2007, Istanbul, Turkey, 28-31 August, 2007.

138.Budak, E., Machining Stability And Machine Tool Dynamics, Proceedings of the 11th International Research/Expert Conference: Trends in the Development of Machinery and Associated Technology TMT 2007, Hammamet, Tunisia, 5-9 September, 2007

139.Ertürk, A., Budak, E., Ozguven, H.N., “Selection of Design and Operational Parameters in Spindle-Holder-Tool Assemblies for Maximum Chatter Stability by Using a New Analytical Model”, 2^nd International Conference on High Speed Cutting, Vancouver, Canada, June 12-13, 2006.

140.Ozlu, E., Budak, E., “Analytical Modeling of Chatter Stability in Turning”, Proceedings of the 9^th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia, May 11-12, 2006.

141.Ozlu, E., Budak, E., “Analytical Modeling of Chatter Stability in Turning and Boring”, 2^nd International Conference on High Speed Cutting, Vancouver, Canada, June 12-13, 2006. 

142.Ozturk, E., Tunc, T., Budak, E., “Optimization of 5-Axis Milling Operations Using Process Models”, Proceedings of the 9^th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia, May 11-12, 2006.

143.Ozturk, E. And Budak, E., “Modeling of 5-Axis Forces”, Proceedings of the 8th International Workshop on Modeling of Machining Operations, pp. 319-326, Chemnitz, Germany, May 10-11, 2005. 

144.Budak, E., “High Performance Milling”, Aerotrends 2004, Bilbao, Spain, November 8-9, 2004.

145.Tekeli, A. and Budak, E., “Increasing Chatter Free Material Removal Rate In Die and Mold Machining”, Proceedings of 3rd International Conference and Exhibition on Design and Production of Dies and Molds, 7th International Symposium on Advances in Abrasive Technology, pp. 17-24, DM2004-50, Bursa, TURKEY- June 17-19, 2004

146.Kayhan, M. And Budak, E., "Investigating Effects of Chatter Vibrations on Tool Wear in Turning", Proceedings of the 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy, 30 June-2 July, 2004.

147.Cimren, E., Budak, E. and Catay, B, "Development of a Machine Tool Selection System Using Analytical Hierarchy Process", Proceedings of the 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy, 30 June-2 July, 2004.

148.Kıvanc, E.B. and Budak, E., "Development of Analytical End Mill Deflections and Dynamic Models", ASME International Mechanical Engineering Conference and Exposition, November 2003, Washington D.C., IMECE 2003-42301.

149.Ozturk, O. And Budak, E., "Modeling of Broaching Process for Improved Tool Design", ASME International Mechanical Engineering Conference and Exposition, November 2003, Washington D.C., IMECE 2003, IMECE-42304.

150.Kivanc, E.B. and Budak, E., "Modeling Statics and Dynamics of Milling System Components", Proceedings of 36th CIRP International Seminar on Manufacturing Systems (ISMS 2003-Progress in Virtual Manufacturing Systems), pp. 433-440, Saarbrucken, Germany, June 3-5, 2003.

151.Budak, E., "Modeling End Milling Process Including Part-Tool Flexibility and Dynamics", Proceedings of 3rd International Seminar on Intelligent Computation in Manufacturing Engineering (ICME 2002), pp. 243-250, Ischia, Italy, 3-5 July, 2002.

152.Arslan, M.Ç., Çatay, B., Budak, E., 'Decision Support System for Machine Tool Selection', Proceedings of the 2nd International Conference on Responsive Manufacturing, pp. 752-757, Gaziantep, Turkey, 26-28, June 2002.

153.Budak, E., "Improving Milling Process Using Modeling", Proceedings of Dies and Molds Conference, Kusadasi, Turkey, 2001.

154.Budak, E., "Broaching Force Monitoring", Proceedings of Third International Conference on Metal Cutting and High Speed Machining, pp.251-260, Metz, France, June 27-29, 2001.

155.Budak, E. and Jolin, Y., "Increasing Productivity in 5-Axis Milling of IBRs Using Force Modeling and Control", SAE General Aviation Conference, 2000-01-1694, Wichita, KS, May 2000.

156.Budak, E., "An Analytical Design Method for Milling Cutters with Non Constant Pitch to Increase Stability", Proceedings of ASME IMECE 2000, Orlando, Florida.

157.Altintas, Y., Engin, S, Budak, E., " Analytical Stability Prediction and Design of Variable Pitch Cutters", Proceedings of ASME 1998 International Mechanical Engineering Conference and Exposition, Manufacturing Science and Engineering, MED Vol. 8, pp.141-148, Anaheim, CA.

158.Altintas, Y., Shamoto, E., Lee, P. and Budak, E., "Analytical Prediction of Stability Lobes in Ball-End Milling", Proceedings of ASME 1996 International Mechanical Engineering Conference and Exposition, Atlanta, USA . Symposium: "The Physics of Machining Processes III", Publication of TMS, ISBN 0-87339-345-7, pp.151-167,1996.

159.Budak, E. and Altintas, Y., "Analytical Prediction of Chatter Stability in Milling- Part I: General Formulation", Proceeding of ASME 1995 International Mechanical Engineering Conference and Exposition, San Francisco, USA.

160.Budak, E. and Altintas, Y., "Analytical Prediction of Chatter Stability in Milling- Part II: Application of the General Formulation to Common Milling Systems", Proceeding of ASME 1995 International Mechanical Engineering Conference and Exposition, San Francisco, USA.

161.Budak, E. and Altintas, Y., "Prediction of Milling Force Coefficients from Orthogonal Cutting Data", ASME 1993 Winter Annual Meeting, New Orleans, USA, Manufacturing Science and Engineering, pp. 453-459, 1993.

162.Altintas, Y., Budak, E., "Peripheral Milling of Flexible Structures", ASME 1992 Winter Annual Meeting, Anaheim, USA, TMS The Physics of Machining Process, pp.97-109, 1992.

163.Budak, E., Altintas, Y., "Flexible Milling Force Model for Improved Surface Error Predictions", ASME 1992 European Joint Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, ASME PD-Vol. 47-1, 1992.

164.Altintas, Y., Montgomery, D., Budak, E., "Dynamic Peripheral Milling of Flexible Structures", ASME 1990 Winter Annual Meeting, Dallas, USA, ASME PED Vol. 48, pp.25-35, 1990.

165.Budak, E. and Ozguven, H.N., "A Method For Harmonic Response of Structures with Symmetrical Nonlinearities", Proceedings of the 15th International Seminar on Modal Analysis, Leuven, Belgium, 1990, Experimental and Numerical Dynamic Analysis, Vol.2, pp.901-915, 1990.

166.Budak, E. and Ozguven, H.N., "Harmonic Vibration Analysis of Structures with Local Non-Linearities and Validity Assessment of Some Linearization Techniques", Structural Dynamics: Recent Advances (Southampton, England), Elsevier Applied Science London, New York, pp. 791-800, 1991.

167.Budak, E. and Ozguven, H.N., "A Dynamic Analysis Method For Harmonically Excited Nonlinear Structures", Proceedings of the 12th ASME Conference on Mechanical Vibrations and Noise, Montreal, Canada, 1989, ASME- DE Vol.18-3, pp.23-29, 1989.

168.Budak, E. and Ozguven, H.N., "Formulation of A New Method for the Dynamic Analysis of Nonlinear Structures", Proceedings of the 3rd National Symposium on Machine Theory and Dynamics, Izmir, Turkey, 1988 (in Turkish).

169.Budak, E. and Ozguven, H.N., "Development of A New Method for the Dynamic Analysis of Nonlinear Systems with Symmetrical Nonlinearities", Proceedings of the 4rd National Symposium on Machine Theory and Dynamics, Istanbul, Turkey, 1990 (in Turkish).